Thermocouple Types J - Iron vs. Constantan (NIST) Temperature Ranges J -210░ through 760░C (-346░ through 1400░F) K - Chromel vs. Alumel (NIST) -270░ through 1372░C (-454░ through 2500░F) DIN J - Iron vs. Constantan (DIN) -200░ through 900░C (-328░ through 1652░F) T - Copper vs. Copper-Nickel -270░ through 400░C (-454░ through 752░F) Isolation Dielectric strength to 2500V transient per 3mm spacing based on EN 61010 for 260Vrms or dc working voltage Protection 240 V rms max for voltage input ranges 200 mA for current input ranges Display: LED 14 segment, 13.8 mm (0.54") Symbols: 8888 ANALOG TO DIGITAL Technique: Dual slope Internal resolution: 15 bits Read Rate: 3/sec Polarity Automatic ACCURACY AT 25░C: ▒0.5░C Temperature Stability: ▒0.05░C/░C Step
Response: 1-2 sec
Warm Up to Rated Accuracy: 30 min Signal Type: Current or voltage Signal Level Function May be assigned to a display range or proportional control output with setpoint #1 when used as a control output. Linearity: 0.2% Step Response Time: 2 - 3 seconds to 99% of the final value ISOLATED ANALOG OUTPUT (if applicable) Same as non-isolated analog output except isolated to 1000 Vdc. Signal type: Current or voltage Signal Level Function May be assigned to a display range or proportional control output with setpoint #1 when used as a control output. Linearity: 0.2% Step Response Time: 2 - 3 seconds to 99% of the final value Only one analog output is available on each unit and it must be factory installed. INPUT POWER INFORMATION Voltage Frequency: 50-60 Hz Power: 6 watts Operating Temperature: 0 to 50░C (115/230 V rms ▒15%) Storage Temperature: -40░ to 85░C Relative Humidity: 90% at 40░C (non-condensing) MECHANICAL Panel cutout: 1/8 DIN 3.62" x 1.77" (45 x 92mm) Weight: 1.27 lb (574 g) Case material: Polycarbonate, 94 V-O UL rated ALARM OUTPUTS (if applicable) 2 Form "C" on/off relays. Configurable for latched and unlatched by software. |
